WEKO3
アイテム
接着剤を浸み込ませたろ紙の燃え拡がり機構
https://cis.repo.nii.ac.jp/records/21
https://cis.repo.nii.ac.jp/records/21ab552191-cb18-4db4-9eaa-99bf182d822d
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
k01-ronbun17.pdf (606.8 kB)
|
copyright (c) 2007 by Chiba Institute of Science
|
| Item type | 紀要論文(ELS) / Departmental Bulletin Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2008-02-29 | |||||
| タイトル | ||||||
| タイトル | 接着剤を浸み込ませたろ紙の燃え拡がり機構 | |||||
| タイトル | ||||||
| タイトル | Mechanisms of Flame Spread over a Filter Paper Permeated with an Adhesive | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Flame spread | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Fire | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Adhesive | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Flame structure | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Pyrolysis temperature | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | departmental bulletin paper | |||||
| ページ属性 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | P(論文) | |||||
| 記事種別(日) | ||||||
| 値 | 原著 | |||||
| 記事種別(英) | ||||||
| 言語 | en | |||||
| 値 | Original Articles | |||||
| 論文名よみ | ||||||
| その他のタイトル | セッチャクザイ オ シミ コマセタ ロシ ノ モエ ヒロガリ キコウ | |||||
| 著者名(日) |
高, 黎静
× 高, 黎静× 平野, 敏右 |
|||||
| 著者名よみ |
コウ, レイセイ
× コウ, レイセイ× ヒロノ, トシスケ |
|||||
| 著者名(英) |
GAO, Lijing
× GAO, Lijing× HIRANO, Toshisuke |
|||||
| 著者所属(日) | ||||||
| 値 | 千葉科学大学危機管理学部環境安全システム学科 | |||||
| 著者所属(日) | ||||||
| 値 | 千葉科学大学学長 | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | Department of Disaster System Sciense,Faculty of Risk and Crisis Management,Chiba Institute of Science | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | President, Chiba Institute of Science | |||||
| 抄録(英) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | This paper presents the results of a study to elucidate the mechanisms of the flame spread over a filter paper permeated with an adhesive. For this study, two typical adhesives used for general purposes are adopted. One is polyvinyl acetate resin, and the other is urea resin. The flame spread rates and temperature profiles near leading flame edges were measured. Also, thermogravimetric analyses of the samples were performed. It was found that flame spread depends strongly on the pyrolysis reaction of the permeated adhesive. The highest pyrolysis temperature is of the pure filter paper, and the pyrolysis temperature decreases with the increase of either of permeated adhesives. Also, the flame spread rate decreases with the increase of the permeated adhesive. The decrease of the heat flux from the gas phase to the sample surface is inferred to be a main cause to decrease the flame spread rate with the increase of the amount of the permeated polyvinyl resin. For urea resin, establishment of a residual carbon layer is inferred to be a main cause of the flame spread rate reduction. Carbon-dioxide ejection during pyrolysis reaction, which is inferred through the thermogravimetric analyses, is supposed to enhance the flame spread rate reduction. | |||||
| 雑誌書誌ID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AA1230240X | |||||
| 書誌情報 |
千葉科学大学紀要 巻 1, p. 159-165, 発行日 2008-02-29 |
|||||
